Help Videos for HamSphere 4.0

There is a growing list of Help Videos for HamSphere 4.0 on YouTube!

The new generation of HamSphere, HamSphere 4.0 has arrived.  All HamSphere 3.0 subscribers can now find the link to HamSphere 4.0 on the HamSphere download page.  You get access to HamSphere 4.0 included for free with your HamSphere 3.0 subscription.  The transceiver you get included with HamSphere 4.0 has all the features of HamSphere 3.0.  There’s really no reason not to try it.

HamSphere 4.0 is an incredible simulation of Ham Radio.  Whereas HamSphere 3.0 is pretty amazing with its simulation of static, fading, and interference, HamSphere 4.0 takes it to a whole new level with realistic propagation, realistic antenna behavior, and an infinitely customizable transceiver.  It is so much like real HF radio that it inspired me to get back on HF.  I’m having a blast DX’ing on HF with my Icom IC-706mkIIg and 160M skyloop antenna, but I’m having a blast on HamSphere 4.0 too.  On HamSphere 4.0 I can experience the same thrills as real radio and experiment with antennas I don’t have in real life.

You can get on HamSphere 4.0 and just start playing, but you’ll have a much more rich and enjoyable experience if you learn more about how it works and how to use it all properly.  Read the User Manual, of course.  For help beyond that, I’ve created a whole set of YouTube videos to teach you about many aspects of HamSphere 4.0.  I hope they are helpful, that you have fun, and that you became a fan of HamSphere 4.0 like me!

Go to the HamSphere 4.0 Help Video Playlist

 

I’m very impressed by the Ham and HamSphere operators who speak multiple languages!

It is very fortunate for me that most HamSphere stations make contacts in English.  In an attempt to add more countries to my log, I’ve looked at using some Spanish  or dusting off my High School French from 35 years ago.  It is very daunting, though.  One station has already told me, very kindly, “your Spanish is very bad”.   LOL.

It’s not like I didn’t already have a clue that I’m no good at languages.  The video below was made a few months back when I attempted to use Google Translate on a portable device to “learn” Italian.  The results were more hilarious than I ever could have imagined or planned!

HamSphere Mt. St. Helens Special Event Results

Partial log from morning sessionIt was a fun way to commemorate a somber and awesome event.  On May 18th, 2012, at 7:32AM local time, at 28.450Mhz on HamSphere “Virtual Ham Radio”, I started making the contacts.  After a brief introduction and look back at the 1980 eruption of Mt. St. Helens, I took the first call.  Mike, N6VIC from California, was the first to receive the special 32nd Anniversary QSL card.
 
There was a pile-up at first but after some rules from admin Tony, 29HS132, and stations learning how I planned to work them all, it went very well.  To those who participated, I thank you for your patience and interest. 
 
I think fun was had by all.  I got to share some of what I had learned in researching the eruption and also help us remember the Ham Radio operators who perished in the blast.  I also shared that there was a real Ham Radio station, W7W operating from the mountain itself on this same anniversary weekend.  This was an opportunity to look back on an incredible event and also just do something fun and different on HamSphere.  Stations who wanted the special limited-time QSL card knew exactly when and where to get it.  It was fun for me to be like a DX station handling a pile-up and I added 12 new countries to my total before the day was over!
 
Some statistics from the event:
Morning Session – 2 hours 45 minutes, 53 completed contacts (and QSL cards sent) with 25 different countries.
Unplanned Night Session (right up to midnight local time) – 1 hour 33 minutes, 13 completed contacts (and QSL cards sent) with 10 different countries.
 
73,
Mike
WB7ECW

Limited Time (VERY limited) QSL Card on Friday, May 18th, 2012

 At 8:32AM on the morning of May 18th, 1980, a small earthquake under the northern face of Mt. St. Helens, a volcanic mountain located in Washington State in the United States, began a chain of events which would lead to the worst volcanic disaster in U.S. history.

Because it was a Sunday morning and the U.S. Forest Service had closed the area around the mountain due to increasing volcanic activity, only 57 people lost their lives in this natural disaster that essentially killed everything in a 200 square mile area. Among those lost that day were Jerry Martin, W6TQF and Reid Blackburn, KA7AMF.  Both were members of the Radio Amateur Emergency Service (RACES) and Amateur Radio Emergency Service (ARES).  Jerry and Reid went into the field to help the U.S. Geological Service (USGS) and National Geographic Society set up remote cameras in order to make scientific observations.

It has been almost 32 years since the 1980 Eruption of Mt. St. Helens.  To those of us who live in the area (I am about 30 miles south of the mountain), May 18th is a date that carries special significance.  We have grown accustomed to having this volcano in our neighborhood and we visit often, thanks to the Mount St. Helens National Volcanic Monument, with its visitors centers and interpretive sites.

On Friday, May 18th, 2012, I am going to be sending out a special QSL card to all those HamSphere operators I can contact between 7:32AM and 9:32AM local time.  That’s 2 hours of contacts, between 1432 UTC and 1632 UTC on May 18th. I will start on a clear frequency near 28.450 Mhz and then move as activity and conditions require.  You can find me on the cluster.  Half-way through the 2-hour period will be the exact time, 32 years ago, that Mt. St. Helens erupted. I hope to talk to you on Friday morning and send you this special card.  After these contacts are done, this card will exist no more!

From HF to HS (and back again?)

 When I was 17 years old, I bought a used Drake TR-4 HF Transceiver from the local Ham Radio Store — Oregon Ham Sales in Albany, Oregon USA.  This would remain my one and only HF rig for the next 34 years.  Old tube rigs like this were amazing creatures, with high voltage running around inside and enough heat produced during transmitting to almost crinkle the paint.  It was a bit scary to hear the metal popping as it expanded and contracted  when I alternated between transmitting and receiving.

Of course, over the years, after using my trusty Drake with dipoles and inverted-vees and homemade yagis and quads, eventually things started to wear out.  Parts became hard to find and eventually I felt unqualified to keep it running.  Besides, wife, family, job, and other hobbies had moved Ham Radio to nothing more than “something I used to do”.  So, on May 5, 2012, I sold my Drake TR-4 to a Ham who had the time and knowledge to get it working.  I imagine that a couple of months from now it will be up and running in a new shack — back to doing what it was made to do.

As you can almost predict, the very act of selling the old HF rig got me interested again.  I got on Google and started researching the changes which had occurred in the hobby since I was last active in 1992.  As I was looking into the status of the Sunspot Cycle, I found mention of “virtual propagation” and stumbled across…HamSphere.  Since you’re reading this on my HamSphere blog, you probably don’t need me to tell you what HamSphere is.   If you don’t know, follow the links along the edge of the Blog page and learn more.  The short version is that HamSphere is “The virtual Ham Radio experience”.  No, it is NOT radio.  The only high voltage present might be in your monitor — if you’re still using an old CRT.  There is no antenna, unless you are using wi-fi to connect to the Internet.  It is virtual.  You don’t have to be licensed, although the rules of conduct encourage (and sometimes enforce) behavior that would be welcome by most Hams on most Ham bands.  You’ve got static and fading and QRM (man-made interference) and QRN (natural interference).  In short, it FEELS like Ham Radio.

I am hooked.  I’ve paid for a year’s subscription and I’m off and running (13 countries in 4 days is most definitely NOT like my experience on real radio, but it is a blast nonetheless).  And you know what else it has done?  It has made me want to get back on the air.  I’m thinking more about what kind of rig I could buy and what kind of antenna I could put up.  Those who object to the very concept of “Virtual Ham Radio” need to understand that it has proven to be an incredible gateway to expanding the real Ham Radio hobby.  I’ve already spoken to two licensed Hams who became licensed after using HamSphere.

Whether you’re a Ham using real radio or a Ham using virtual radio or a non-Ham using virtual radio, just enjoy it.  You’ll make new friends all over the world and, ultimately, isn’t that the greatest thing about this hobby?